Combination Surge Protection Device (SPD) / Lightning arrester (assembly including pluggable cartr. + bas. elem.) - Phoenix Contact (PLUGTRAB) - Rated voltage 120Vac / 120Vdc - Protection type Class III / T3 / Type 3 - 1-pole (1P) - Maximum discharge curent (Imax) (L-N) 10kA - Maximum continuous voltage (Uc) (L-N) 150V - with 1C/O - S.P.D.T. (Single Pole Double Throw) (End of life remote indicator) contact - Plug-in / DIN rail mounting - 17.7mm width - compatible with 3-conductor (L/N/PE) single-phase systems - with LED status indicator - Screw-clamp connections - PLT-SEC-T3-120-FM-UT

Surge arrester / suppressor / Surge Protection Device (SPD) / Interference suppression filter for 2-wires analog current signal loops (assembly including pluggable cartr. + bas. elem.) - 9/10 grounded directly - floating - Phoenix Contact (PLUGTRAB) - Rated voltage 24Vdc - Protection type IEC class C1 / IEC class C2 / IEC class C3 / IEC class D1 - Impedance-neutral insertion and removal - Maximum continuous voltage (Uc) (AC) 21V / (DC) 30V - Plug-in / DIN rail mounting - 17.7mm width - compatible with 4-20mA loops - with IQ function monitoring + remote indication via TBUS - Screw-clamp connections - PT-IQ-1X2-24DC-UT

Surge Protection Device (SPD) / Lightning arrester (assembly including pluggable cartr. + bas. elem.) - varistor-based protection - Phoenix Contact (VALVETRAB) - Rated voltage 277Vac - Protection type T1 / Type 1 - Maximum discharge curent (Imax) 40kA - Maximum continuous voltage (Uc) (AC) 385V - with 1C/O - S.P.D.T. (Single Pole Double Throw) (End of life remote indicator) contact - contains Plug-in cartridge + Plug-in base - Plug-in / DIN rail mounting - 71.2mm width - compatible with 277Vac/480Vac AC 4-wire + ground systems - with optical-mechanical status indicator - Screw-clamp connections - VAL-US-277/40/3+1-FM

Plug-in base element with remote indication contact - 1+0 circuits - Phoenix Contact (VALVETRAB) - Protection type Class II / T2 / Type 2 - with SPST-NC (Single Pole Single Throw - Normally Closed) (End of life remote indicator) contact - Plug-in / DIN rail mounting - with optical-mechanical status indicator - Screw-clamp connections - VAL-MS BE/FM

Replacement plug-in S.P.D. cartridge for 120/208 V grounded wye and 120 V split-phase systems - Phoenix Contact (VALVETRAB) - Rated voltage 208Vac / 120Vac - Protection type Class II / T2 / Type 2 - Maximum discharge curent (Imax) 40kA - Maximum continuous voltage (Uc) (AC) 150V - Plug-in mounting - 17.5mm width - compatible with VAL-MS - with optical-mechanical status indicator - VAL-MS 120 ST

Surge arrester / suppressor / Surge Protection Device (SPD) / Interference suppression filter (assembly including pluggable cartr. + bas. elem.) for 2-wires binary signal lines - 3/6 grounded directly via gas-filled surge arrester - with knife-disconnection - Phoenix Contact (TERMITRAB) - Rated voltage 24Vdc - Protection type IEC class C1 / IEC class C2 / IEC class C3 / IEC class D1 - Impedance-neutral insertion and removal - Maximum continuous voltage (Uc) (DC) 30V - with 1C/O - S.P.D.T. (Single Pole Double Throw) (End of life remote indicator) contact - contains Plug-in cartridge + Plug-in base - Plug-in / DIN rail mounting - 6.2mm width - compatible with binary signals (2-wire) - with optical-mechanical status indicator - Spring / Push-in connections - TTC-6P-2X1-F-M-24DC-PT-I

Surge Protection Device (SPD) / Lightning arrester (assembly including pluggable cartr. + bas. elem.) - narrow design - Phoenix Contact (VALVETRAB) - Rated voltage 120Vac - Protection type Class II / T2 / Type 2 - 1-pole (1P) - Maximum discharge curent (Imax) (L-N) 40kA - Maximum continuous voltage (Uc) (L-N) 175V / (L-PE) 175V / (N-PE) 150V - with 1C/O - S.P.D.T. (Single Pole Double Throw) (End of life remote indicator) contact - contains Plug-in cartridge + Plug-in base - Plug-in / DIN rail mounting - 25.4mm width - compatible with 3-conductor (L/N/PE) systems - with optical-mechanical status indicator - Screw-clamp connections - VAL-SEC-T2-1S-175-FM

Plug-in base element with direct grounding with bridge between 3/4 and 9/10 - Phoenix Contact (PLUGTRAB) - Protection type IEC class C1 / IEC class C2 / IEC class C3 / IEC class D1 - Plug-in / DIN rail mounting - compatible with PT 2X2 - Screw-clamp connections - PT 2X2-BE

Surge Protection Device (SPD) / Lightning arrester - supply line from above (assembly including pluggable cartr. + bas. elem.) - Phoenix Contact (VALVETRAB) - Rated voltage 415Vac / 240Vac - Protection type Class II / T2 / Type 2 - 4-poles (4P) - Maximum discharge curent (Imax) (L-N) 40kA - Maximum continuous voltage (Uc) (L-N) 275V / (L-PE) 275V / (N-PE) 350V - with 1C/O - S.P.D.T. (Single Pole Double Throw) (End of life remote indicator) contact - contains Plug-in cartridge + Plug-in base - Plug-in / DIN rail mounting - 71mm width - compatible with 5-conductor (L1/L2/L3/N/PE) systems - with optical-mechanical status indicator - Screw-clamp connections - VAL-MS 320/3+1/FM-UD

Plug-in base element - Phoenix Contact (PLUGTRAB) - Protection type Class III / T3 / Type 3 - Plug-in / DIN rail mounting - 17.7mm width - compatible with PLT - Screw-clamp connections - PT-BE/FM

Plug-in base element with direct grounding with bridge between 3/4 and 9/10 - Phoenix Contact (PLUGTRAB) - Plug-in / DIN rail mounting - compatible with PT 1X2 - Screw-clamp connections - PT 1X2-BE

Surge Protection Device (SPD) / Lightning arrester Type 3 - Phoenix Contact (PLUGTRAB) - Rated voltage 24Vac - Protection type Class III / T3 / Type 3 - 1-pole (1P) - Maximum continuous voltage (Uc) (L-N) 34V / (L-PE) 34V / (N-PE) 34V / (L+/L-) 34V / (L+/PE) 34V / (L-/PE) 34V - with 1C/O - S.P.D.T. (Single Pole Double Throw) (End of life remote indicator) contact - Plug-in / DIN rail mounting - 17.7mm width - compatible with 3-conductor (L/N/PE) systems; CAN protocol; CANopen protocol; DeviceNet protocol; FOUNDATION Fieldbus EX (I) protocol - with LED status indicator - Screw-clamp connections - PLT-SEC-T3-24-FM