This post discusses how to configure the digital and analog inputs and outputs of a SINAMICS G120 using Startdrive in TIA Portal.
More >
Home > VFD
Resources
VFD
Siemens: How to load parameters to an IOP-2 via CLI
This post discusses how to use a Command Line Interface (CLI) file to load a set of parameters to any SINAMICS G VFD that supports the IOP-2.
More >
Siemens: What to look out for when integrating a G130 into TIA Portal
This post discusses some best practices to consider when integrating a G130 VFD into TIA Portal.
More >
Siemens: How to order and setup a G120X
This video discusses how easily the new SIMATIC G120X can be ordered and assembled, and features a brief tutorial on remote commissioning via a Smart Access Module.
More >
Siemens: How to configure SINAMICS VFDs on Ethernet/IP
This is the third video in a three-part series on integration of Siemens variable frequency drives into Allen-Bradley PLC applications.
More >
Siemens: How to integrate SINAMICS VFD faceplates into Allen-Bradley FactoryTalk View Studio
This is the second video in a three-part series on integration of Siemens variable frequency drives into Allen-Bradley PLC applications.
More >
Siemens: How to integrate SINAMICS VFDs into Allen-Bradley Studio 5000
This is the first video in a three-part series on integration of Siemens variable frequency drives into Allen-Bradley PLC applications.
More >
AWC: Modernize Your Control System
In these economically challenging times, we are helping customers get ahead of the curve and achieve better, faster, safer results with a more modern Control System through AWC’s Control System Review process.
More >
AWC’s Top 10 Reasons to Modernize Your Control System NOW
In industries where automation and controls are critical to production, process, and safety, it is important to ensure that control systems are modernized for a number of reasons, including the 10 reasons listed below.
More >
Siemens: How to troubleshoot Fault Code A08526 on a G120 in TIA Portal
This video provides a step-by-step example of how to use Startdrive in TIA Portal to troubleshoot the presence of an “A08526 (F) PROFINET: No cyclic connection” fault on a SINAMICS G120.
More >
Siemens: How to upload a G120 into TIA Portal
This video provides a step-by-step example of how to establish connection to and upload an existing SINAMICS G120 variable frequency drive using Startdrive in TIA Portal.
More >
Siemens: How to commission a G120 via Startdrive in TIA Portal
This video provides a step-by-step example of how to quickly commission and test a SINAMICS G120 using the Commissioning Wizard of Startdrive in TIA Portal.
More >